Garage Door Opener Tips: What To Do When Your Garage Won’t Open

garage-doors

While garage door openers usually make life more convenient, you’ll occasionally run into problems with them. Luckily, most of these issues are easy to resolve. You can always use professional service. Anyways, let’s get back to the topic.

If your door isn’t opening the way it should, keep these garage door opener tips in mind. There’s a good chance that you’ll be able to take care of the problem on your own.

Check The Transmitter Batteries

While checking the batteries may seem like an obvious fix, it’s one that’s often overlooked. If your transmitter isn’t responding at all, swap out the batteries for new ones and see if that solves the problem.

Clean The Photo Eyes

Your transmitter is able to open your garage door because it connects to something called a photo eye. There should be two photo eyes on your garage door; one on either side.

If your garage door isn’t opening and the batteries don’t seem to be the culprit, the issue might lie with your photo eye. Locate them and give them a good cleaning. Sometimes, dirt and dust builds up on them, which keeps them from responding to the transmitter’s signals. If the photo eye is damaged or appears to be misaligned, you may want to contact a garage repair professional. Bringing in a professional when you need one is one of the most important garage door opener tips.

Check To Make Sure The Track Is Properly Aligned

Is your garage making noise when you press the transmitter, but failing to open? If so, the tracks may have come out of alignment. Your garage door can’t open unless the track that it runs on is aligned correctly.

You can check to see if the track is aligned properly by looking for gaps between the railers. If you notice a problem, contact a professional right away. Misaligned tracks can be dangerous if left unfixed.

Make Sure Your Springs Are In Good Shape

If your garage door is making noise, but there’s not an issue with your tracks, the culprit might actually be your door’s springs. Examine your garage door from the inside and keep an eye out for a stretched or broken spring. If you notice a problem, contact a professional to handle the repair.

Take A Look At The Open And Close Limits

Is your garage door open partially, but won’t open all the way? If so, your open and close limits may have been adjusted. If these settings are tampered with, your door won’t be able to open the way it normally does.

Take a look at your garage door manual and find out how to adjust the open and close limits. See if there are any recommended limits. Adjust the limits until your door is opening properly again.

Make Sure The Disconnect Switch Hasn’t Been Hit

Every garage door opener comes with a disconnect switch. While this can be very useful, especially when it comes to repairs, it can occasionally cause problems.

If your garage door won’t open at all, grab your manual and find out where the door’s disconnect switch is. Make sure it hasn’t been pressed. If it has been pressed, reset your door. This should get it running normally again.

Check For Transmitter Issues

Is your garage door opening on its own? If so, there’s probably an issue with the transmitter frequency. Fix the frequency, and you’ll fix the problem.

Now that you’ve read over these garage door opener tips, you should be able to take care of any problems that arise. Whether you fix the problem yourself or bring in a professional, your garage door will once again be running correctly.

Related Posts

TOS

2016-03-31 12:28:08
wpadmin

1

The Cheapest Home Air Conditioning Systems

2016-06-24 11:04:17
wpadmin

1

The World is going virtual

2016-02-24 12:54:40
wpadmin

1

Contact Me

2016-02-24 12:40:20
wpadmin

1

How To Find affordable Roofing Services

2016-04-04 13:18:10
wpadmin

1

Disclaimer

2016-02-24 12:40:20
wpadmin

1

Making Life Simple With Wireless Technology

2016-03-18 09:51:24
wpadmin

1

About Me

2016-02-20 09:16:25
wpadmin

1